Description:

Flat Panel Antenna Portable Auto Terminal uses an advanced and ultra-modern high-gain flat array antenna system. This is a completely new and novel antenna system designed and produced for a new generation of flat- type integrated satellite communication terminals. All components – antenna system, RF unit, satellite router or receiver, LAN wireless devices and power supply are integrated into a flat compact terminal enclosure and covered by a special metal shield.

Flat Panel Antenna Portable Auto Terminal has completely changed the form of the standard parabolic antenna systems that have been used for satellite communication and TV for many years. The uSat terminal provides users of satellite communication and television with a new, unique system that is both easy to deploy and operate. It aims to replace parabolic-shape antenna products that have been characterized by split type of installation, operation, debugging and maintenance.

Due to fast, simple and easy deployment, the uSat flat portable terminals are suitable for emergency services, disaster recovery, military, security, government and enterprise communication applications. Portable uSat flat terminals can be deployed within a very short time to achieve reliable data, voice and video transfer services in areas without terrestrial networks or in places where a temporary communication is required.

Features:

* All-in-one, fully integrated flat panel antenna, Modem, BUC, LNB, Wifi, Power Supply

* Higher gain efficiency

* Small Size, Light weight for backpack

* Secure satellite easily via mobile app connected with terminal through bluetooth

* 3.1 inch OLED display for quicker pointing satellite and checking real time working status

flat panel portable auto terminal(3)

Specification:

Item		uSat Flat-Panel Portable (Auto) Terminal
Model No.		FL60P-E
Antenna Type		Slotted waveguide array antenna
Equivalent to parabolic antenna size		0.6m
Antenna Efficiency		85%
Frequency Range	Tx	13.75~14.50GHz
	Rx	10.95~12.75GHz
Polarization		Linear
Receiving Gain		≥35dBi
Transmitting Gain		≥36dBi
G/T		13dB/K
First Sidelobe		≥14dB
Cross Polarization Isolation		>25dB
Tx/Rx Polarization Isolation		>85dB
Satellite Acquisition		Automatically pointing to satellite, level error<0.2dB
Azimuth Range		Unlimited, fine tune ±80 °
Elevation Range		7° ~ 90°
Polarization		±110°
Power Supply		AC 90-264V (DC 24V ±5% Optional)
Max Power Consumption		120W (with 3W BUC)
		160W (with 8W BUC)
Terminal Dimensions (not including cables and backpack)		(L×W×H): 680×650×240
Total Terminal Weight (not including cables and backpack)		18.8Kg (Max), there is a slight difference in configuration
Wind (Operational)		13m/s (45km/h)
Operational Temperature		-25°C to +50°C
Ingress Protection		IP-66
Humidity		5% ~ 95%
Typical Satellite Modem		CDM-570AL; HX200; iDirect X7 or other*
Typical BUC		3W or 8W
Typical LNB		PLL LNB 30K for TDMA systems (Hughes, iDirect) PLL LNB 5K for SCPC systems
Wireless Router		Supported protocols: IEEE 802.11b/g/n at 2.4GHz
LAN Port (RJ45)		Gigabit Ethernet
Bluetooth Device		v.2.0
GNSS Device Supports		GPS/GLONASS/BeiDou-2/Galileo

* According to customer's requirements

Dimensions:

flat panel portable auto terminal dimension

Packing List

Basic configuration of the uSat terminal:

Slotted waveguide array flat-panel terminal (equivalent to 0.6m Ku-band parabolic antenna)
Satellite modem module
BUC module
LNB module
GNSS module
Display module
Satellite search module
Wireless router
Power supply module
Protective casing / Support platform

Unlike standard VSAT systems the above elements are integrated inside the uSat Terminal.

Upon request Starwin can investigate the feasibility of any customized configuration that a customer may require.

The standard configuration is as follows:

Item	Photo	Part Name	Qty	Remarks
01		uSat Ku-band Portable Flat Terminal	1	Standard
02		Network Cable – 5m CAT5 with two RJ-45 jacks (waterproof at the terminal side)	1	Standard
03		Power Cable -10m	1	Standard
04		Back-pack	1	Standard